16
Be sure to fully charge the battery before using your device for the fi rst time.
1. Plug the DC cord of the AC adapter into the power connector of the device ( ).
2. Plug the female end of the AC power cord into the AC adapter and the male end into an electrical outlet ( ).
3. The charge indicator glows in amber when charging is in progress. Do not disconnect your device from AC power
until the battery is fully charged, as indicated by the amber indicator turning into green. This will take a couple of
hours.
NAUTIZ X7 Manual - Chapter 1
Getting Your Device Ready for Use
Connecting to AC Power and Charging the Battery
1
2
1
2
CAUTION: For optimal performance of the lithium battery, take note of the following:
Use the included AC adapter only.
•
There is no need to fully discharge the battery before charging. You can charge the battery before it
•
is discharged.
Do not charge the battery where the temperature is high (e.g. in direct sunlight).
•
As a protection against damage, your device stops charging when the battery’s temperature is
•
extremely high or low. In high temperature conditions, the charging stops when the battery’s
temperature gets above 70 °C (158 °F) and continues when the temperature lowers to 60 °C (140
F). In low temperature conditions, the charging stops when the temperature gets below -5 °C (23 °F)
and continues when the temperature rises to 0 °C (32 °F).
If you will not use the product for a long period of time, be sure to fully charge the battery at least
•
once every two weeks. Over discharge of the battery can affect the charging performance.
