manualshive.com logo in svg

Hand Held Products 7400/7450, User Manual

Share
Download
Hand Held Products 7400/7450 User Manual Download Page 63

6 - 9

Installing The Charging/Communication Cradle

To install and use the HomeBase, IntelliBase or Inte, you need the following equipment:

•

HomeBase/IntelliBase/Inte with power supply

•

Serial cable

Set the Dolphin HomeBase/IntelliBase/Inte on a dry, stable surface, such as a desktop near an electrical outlet.  Be sure 
to provide enough workspace with good lighting for the user to view and operate the Dolphin terminal while it is in the HomeBase/
IntelliBase.

Connecting the Cables

Connect the HomeBase/IntelliBase/Inte to the host computer or other device by plugging an RS-232 serial cable into the 
RS-232 Communications Port on the rear of the HomeBase.  The wiring of your cable depends on whether the other device is 
set up as a DCE (Data Communications Equipment) or DTE (Data Terminal Equipment) device. 

The HomeBase/IntelliBase Communication Port is configured as a DCE device.  To communicate with a DTE device such as a 
computer, use a standard (or straight-through) RS-232 cable.  To communicate with a DCE device, use either a null modem 
adapter in line with a standard RS-232 cable, or a null-modem serial cable. 

You can make your own cables by following the pin configuration in the chart below.  To do so, you must determine if your host 
RS-232 device is 9-pin or 25-pin, and whether it is configured as a DCE or DTE device.

The HomeBase/IntelliBase/Inte 

cannot

 be daisy-chained. 

Connect the power supply to the charging/communication cradle.  Plug the AC transformer into the Dolphin HomeBase/
IntelliBase/Inte 5 Volt DC power supply connector.  The AC wall transformer provided can power only one HomeBase/
IntelliBase/Inte.  HHP recommends that you leave the Dolphin HomeBase/IntelliBase/Inte connected to its power 
source at all times, so that it is always ready to use.

Set the baud rate switch to the communication mode you are going to use. Refer to Table 2 for HomeBase switch settings or 
Table 3 for IntelliBase/Inte switch settings. 

HomeBase /Host 
Port (DCE)

IBM AT DB9 
(DTE)

IBM XT 
DB25 (DTE)

Modem DB25 
(DCE)

Pin /  Input Signal

2   /  (RD)

2

3

2

3   /  (TD)

3

2

3

5   /  (SG)

5

7

7

4   /  (DTR)

4

20

6

6   /  (DSR)

6

6

20

7   /  (RTS)

7

4

5

8   /   (CTS)

8

5

4

Summary of Contents for 7400/7450












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands