manualshive.com logo in svg

Hand Held Products 7400/7450, User Manual

Share
Download
Hand Held Products 7400/7450 User Manual Download Page 56

6 - 2

Dolphin Charging/Communication Cradle Parts & Functions

Front Panel

HomeBase/IntelliBase/USB HomeBase 

Dolphin Terminal Well

  Place the Dolphin in this well to communicate with a host device and to charge the Dolphin’s battery.

LEDs

  There are two LEDs on the front panel of the HomeBase/IntelliBase/USB HomeBase.

1.

Dock LED 

  Turns solid green when the Dolphin Terminal is properly seated into the Dolphin HomeBase.

2.

COMM LED

   

Indicates the status of data transfer between the Host Device and the Dolphin Terminal as described below:

Front View of HomeBase/IntelliBase/USB HomeBase

Comm LED

Description

Red LED

Data is being sent from the Host Device to the 
Dolphin

 

HomeBase.

  

Green LED

Data is being sent from the Dolphin HomeBase 
to the Host Device.

Orange LED

Data is being sent at high data rates.

DOCK LED

COMM LED

Terminal Well

Summary of Contents for 7400/7450












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands