manualshive.com logo in svg

Hand Held Products 7400/7450, User Manual

Share
Download
Hand Held Products 7400/7450 User Manual Download Page 51

5 - 3

Configuring the Cisco

®

 DSSS WLAN Radio

The Aironet Client Utility (ACU) enables you to change the configuration parameters of the Cisco DSSS WLAN radio. Exit the 
HHP demo screen. Go to 

Start

>

Programs

>

Cisco>Client Utility

. Double-tap the 

Client Utility

 (ACU) icon and the screen shown 

below displays. 

To configure the radio card:

1. Enter the SSID (wireless LAN identifier) for the network. If  you do not know the SSID, contact your system  administrator. 

2. Enter other radio specific information.

3. Click  

OK

 to save any changes you have made and to exit utility.

For more information the radio settings, go to 

Start

>

Programs

>

Cisco>Cisco Setup

 or  see the document entitled “Using the 

Client Utilities for Windows CE” included on the HHP Dolphin Documentation CD.

Aironet Client Utility Screen

Summary of Contents for 7400/7450












































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands