Hand Held Products 7400/7450, User Manual

Page: 26 / 107

2 - 10
Follow these steps to establish a connection for the first time after configuring the settings:
1. Select Launch ActiveSync in the DetectoidPC window.
2. Start ActiveSync on the Dolphin terminal.
Once parameters are configured and saved, you do not need to run DetectoidPC again unless you need to change the
ActiveSync settings or cold-boot the terminal.
Configuring the Modem
If your Dolphin 7400 hand held computer is equipped with a modem, follow these configuration instructions. Use the Dolphin
7400 mouse utility to navigate through the configuration process if your terminal does not have a touch screen. For more
information about the mouse utility, see Navigating the Keyboard in Chapter 4.
1. From the Start menu, select Programs>Communication>Remote Networking.
2. Select Make New Connection. Type in the name for the connection. Select Dial-Up Connection and touch Next.
3. Select the modem from the drop-down menu, CIRRUS LOGIC 56K MODEM or PCMCIA_CARD_MEMBER F56R_NCTV2,
and then touch Configure.
4. Set the option on Port Settings tab as shown below and then touch OK.