Hand Held Products 7400/7450, User Manual

Page: 24 / 107

2 - 8
Using DetectoidPC™ and DetectoidCE™
Use DetectoidPC to configure the ActiveSync® settings on your PC for communication with a Dolphin terminal. Detectoid PC
sets the baud rate and configures the COM port for ActiveSync. Once the settings are configured, you can save them and your
PC is always ready to connect with the Dolphin terminal.
Before starting, ensure that your Dolphin is connected via serial cable or docked in a working HomeBase or IntelliBase.
If ActiveSync is detected to be running on the PC when DetectoidPC is started, the following message will appear:
Click OK to continue using DetectoidPC to set up communication settings.
On starting, DetectoidPC will check for the availability of COM ports, as well as IrDA/USB support. Once the terminal is detected,
the port status will change from “Idle” to “Listening” as shown in the screen shot above.