LT-S-(L) Technical manual
7.3
Compressor installation
The installation of the compressor in the refrigeration system should be
accessible and make sure that the compressor is away from the heat source to prevent
heat radiation. The compressor should also be installed as close as possible to the
electrical power supply for easier connection. It is necessary to keep good
ventilation and low humidity condition in the site. Make sure that the frame or support
is strong enough to prevent excessive vibration and noise while the compressor is
running and must reserve enough space for compressors' future maintenance work.
Compressor should be installed horizontally. Meanwhile, it is recommended to
install mounting pad to avoid the compressor from delivering vibrations to the piping.
The compressor anchor holes (NO.1~4)are chosen as in figure 7-2&7-3.
1
）
LT-65/32<-83/41
Figure 7-2.LT-83/41<-65/32anchor hole
