EN
41
SAFETy INSTRUcTIONS
Read the operating instructions carefully before use!
Please retain for future reference�
WARNING!
• The electrical connection must be carried out by a qualified electrician and
comply with IEC60364-1�
• The power supply to the high-pressure washer must have a residual current
device with a tripping current of 30 mA in 30 ms, or a device which disconnects
the earth circuit�
• This high-pressure washer has been designed for use with cleaning agent from
or recommended by the manufacturer� Use of any other cleaning agents or
chemicals may entail risks�
• Do not use the high-pressure washer around other people who are not
wearing protective clothing�
• High-pressure jets can be dangerous if used incorrectly� The jets must not be
pointed at persons, live electrical equipment or the high-pressure washer itself�
• This high-pressure washer is not intended for use by children or other persons
with reduced physical, sensory or mental capabilities that prevent them from
using it safely, unless they are instructed or supervised by a person responsible
for their safety� Ensure that children do not play with the high-pressure washer�
• Check carefully that the high-pressure washer is not damaged before using it�
Do not start it if any faults are detected
• Check in particular that the power cable’s insulation is undamaged and does
not have any cracks� If the cable is damaged, it must be replaced by a qualified
electrician�
• Do not point the jet at yourself or anyone else in order to clean clothes or
shoes�
• Risk of explosion – do not spray towards flammable liquids�
• Disconnect the power supply before carrying out maintenance�
• Water that has flowed through non-return valves should be regarded as no
longer fit for drinking�
• Disconnect the high-pressure washer from the power mains for cleaning and
maintenance, and when replacing parts�
Operating instructions for
high-pressure washer
ENGLISH
Summary of Contents for 220-137
Page 53: ......
