EN
12
4. The product can be mounted with side (1)
or bottom (2) fasteners. Put the screws
in the holes, put on the lock washers and
tighten the nuts.
FIG. 3
Cable colour coding
The DT connector’s red wire is (+) and the black
wire is (–).
WARNING!
• The product must only be used within its
rated voltage range, 9 to 36 VDC.
• The light source gets hot when the
product is switched on. Allow the light
source to cool for at least 30 minutes
before touching or handling it.
• Make sure there is a free flow of air
through the cooling fins on the light
source and keep the fins clean.
Summary of Contents for 016048
Page 3: ...1 2 A B...
Page 4: ...3 1 2...
