Page 4
PARTS INCLUDED FOR ASSEMBLY (parts are not to scale):
ASSEMBLY INSTRUCTIONS:
1.
Shut off power at the fuse box or circuit breaker box, if necessary remove old fixture
and all mounting hardware from outlet box.
2.
Carefully unpack your new fixture and lay out all the parts on a clear area, Take care
not to lose any small parts necessary for installation.
3.
Place the Glass panel B (#8) into the Metal Frame B (#7) and secure with clips
located on
inside of
metal frame B (#7).
4.
Place the Glass panel A (#6) into the Metal Frame A (#4) and secure with clips
located on
inside of
metal frame A (#4).
5.
Place the Glass shade (#9) onto the socket and secure with the Screw shell (#10) by
using Spanner (#11) provide.
6.
Align the Metal Frame B (#7) to the fold metal sheet located on the Metal Frame A
(#4) and secure with the Screw (#5).
7.
Thread the Rod (#3) to Metal Frame A (#4) and thread the rest Rod (#3) one by one
to desired length, then thread the Rod (#3) to the Canopy (#2).
Pull the wire until taut
.
2 Screw shell(#10)
4
Rod
(#3)
1 Canopy (#2)
2 Glass Shade(#9)
4 Glass
panel A (#6)
4 Glass panel B (#8)
4 Screw(#5)
