Page 6
PARTS INCLUDED FOR INSTALLATION (parts are not to scale):
3 Mounting Screw (#1) 1 Ground Screw (#12) 2 Outlet Box Screw (#16)
3 Wire Connector (#14) 1 Mounting Plate (#13) 1 Spanner (#11)
INSTALLATION INSTRUCTIONS:
1.
Attach the Mounting Plate (#13) to the outlet box in the ceiling with two outlet box
Screws (#16). The side of the Mounting Plate marked “GND” must face out.
2.
Connect the white wire from the fixture to the white wire from the Outlet Box (#15),
and the black wire from the fixture to the black wire from the Outlet Box (#15).
Cover the two wire connections using the two provided Wire Connectors (#14).
Wrap the two wire connections with electrical tape for a more secure connection.
If
your outlet box has a ground wire (green or bare copper), connect fixture’s ground
wire to it using the wire connector (#14). Otherwise connect the copper ground from
the fixture to Ground screw (#12) on the Mounting Plate (#13).
Note: If you have
electrical questions, consult your local electrical code for approved grounding
methods.
3.
After wires are connected, tuck them carefully into the ceiling Outlet box, then place
Canopy (#2) over the Mounting Plate (#13) and secure it against ceiling with
Mounting Screw (#1).
4.
Install the light bulb (not included) in accordance with the fixture’s specifications.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!!)
5.
Installation is complete. Turn on the power at the circuit breaker or fuse box. Turn
the light switch on to activate the fixture.
