Pulsar CHROMABEAM66 Manual Download

Page: 1 / 8

Pulsar Light of Cambridge Limited, 3 Coldhams Business Park, Cambridge, CB1 3LH UK Tel: +44 (0)1223 403500 [email protected] www.pulsarlight.com

7627 CBEAM66 and CFLD66(100)R Instructions

Item Code:

Item Code: CBEAM66[T] - [F][B]
Options:

Options:

[T] - LED Type:

TC, RGB, VW, SC, UV

Options:

[F] - Body Finish: B

Black, S

Silver, W

White, Custom

Options:

[B] - Beam Angle: 5

Item Code:

Item Code: CFLD[W]R[T] - [F][B]
Options:

Options:

[W] - Mains Power: 66 or 100W

Options:

[T] - LED Type:

TC, RGB, VW, SC, UV

Options:

[F] - Body Finish: B

Black, S

Silver, W

White, Custom

Options:

[B] - Beam Angle: 8, 25, 45, 10x35, 10x 90, 90

The Chroma

Chroma

ChromaBeam66

Beam66

Beam66 and Chroma

Chroma

ChromaFlood66

Flood66

Flood66////100R

100R

100R contain state of the art,

high  brightness,  high  efficiency  Red,  Green  and  Blue  LEDs.    These  three
primary  colours  can be mixed together to make  an  incredible palette  of
16.7 million colours.
They  are IP66 rated  fixtures  and therefore suitable  for  outdoor  or indoor
use. They are powered directly from 85-277 Volts AC and have full remote
DMX  control  of  RGB  levels  or  can  function  in  Stand  Alone  Mode.
Numerous  chases  and  sequences  are  built  in,  enabling  superb  lighting
effects without complicated programming.
These impressive fixtures are ideal for the architectural and entertainment
markets  to  give  an  unlimited  colour  palette  that  can  enhance  building
facades,  water  features  and  focal  displays  or  to  providing  stunning
dynamic  colour  in  shows,  conferences,  concerts  and  themed
environments.
The  Chroma

Chroma

ChromaBeam66

Beam66

Beam66 and Chroma

Chroma

ChromaFlood66/

Flood66/

Flood66/100R

100R

100R contain PULSAR

PULSAR

ChromaZone

ChromaZone controllers.
The DMX Start Address and ChromaZone functions of each unit may be
set up using the internal User

User

User Interface Module

Interface Module

Interface Module (UIM) or remotely from a

controller using a digital DMX

DMX

DMX (D

Digital M

MultipleX

X) signal....

Please see the

Channel Ass

Channel Assignments Tables

ignments Tables

ignments Tables sheet for details of the

different modes.
The Chroma

Chroma

ChromaBeam66

Beam66

Beam66 and Chroma

Chroma

ChromaFlood66/100R

Flood66/100R

Flood66/100R have numerous chases

and effects built in, making it possible to achieve fantastic effects without
programming. These internal effects can be pre-selected with the User

User

Interface Module

Interface Module (UIM) for use in Stand Alone mode, or from a controller
using a digital DMX

DMX

DMX (D

Digital M

MultipleX

X) signal.

Please see the

Menu Selection Overview

Menu Selection Overview sheet for a pictorial

representation of the menu functions.
The Chroma

Chroma

ChromaBeam66

Beam66

Beam66 and Chr

Chr

Chroma

oma

omaFlood66/100R

Flood66/100R

Flood66/100R have mounting brackets

making them ideal for floor, wall, ceiling or rig mounting.
The ChromaFlood

ChromaFlood

ChromaFlood100R

100R

100R pictured at the top of this page shows the

mounting brackets arranged for floor mounting.
The Chroma

Chroma

ChromaBeam66

Beam66

Beam66 and Chroma

Chroma

ChromaFlood66/100R

Flood66/100R

Flood66/100R have a colour code letter.

This signifies the finished colour of the fixture (B = Black, S = Silver,
W=White)
Custom colours are available – please discuss with Pulsar if required.

The Chroma

Chroma

ChromaBeam66

Beam66

Beam66 and Chroma

Chroma

ChromaFlood66/100R

Flood66/100R

Flood66/100R have a thermal

management system.  This progressively reduces the power to the LEDs if
the internal temperature exceeds limits set by the software.
Excess  temperature  will  occur  if  the  units  are  exposed  to  high  ambient
temperatures  or  inadvertently  covered.    It  is  therefore  important  for
maximum performance that they have good ventilation on all sides.
Operating temperature range:

Operating temperature range:

Operating temperature range: -20

C to +50

The lenses shipped with the Chroma

Chroma

ChromaBeam66

Beam66

Beam66 and Chroma

Chroma

ChromaFlood66/100R

Flood66/100R

may be easily changed. Currently 5 degree lenses for the ChromaBeam

ChromaBeam

ChromaBeam66

66,

and 8, 25, 45, 10x35 (elliptical), 10x90 (elliptical), and 90 (no lens) lens plates
are available for the ChromaFlood

ChromaFlood

ChromaFlood66/100R

66/100R

66/100R.

Other lenses may become available, please contact Pulsar

Pulsar

Pulsar or see

www.pulsarlight.com for details
NB

NB ---- Patents applied for

Patents applied for

Mains Supply

Mains Supply - The C

Chroma

hroma

hromaBeam66

Beam66

Beam66 and Chroma

Chroma

ChromaFlood66/100R

Flood66/100R

Flood66/100R work

correctly on any mains voltage from 85-277 VAC, 50-60Hz, (self adjusting).
Power consumption is 66 (100) Watts max.
A  5m,  bare  ended,  mains  cable  is  provided.    The  bare  end  of  the  cable
should be fitted with a suitably approved and rated mains plug.   Note: in
some countries it is a requirement that such a plug be fitted by a qualified
electrician.

CABLE COLOURS

Green/Yellow =

Earth / Ground

Brown = Live / Phase / Hot

Blue = Neutral

WARNING

WARNING ---- THIS APPLIANCE MUS

THIS APPLIANCE MUS

THIS APPLIANCE MUST BE EARTHED

T BE EARTHED

For safety we recommend the use of a Residual Current Circuit Breaker. An

For safety we recommend the use of a Residual Current Circuit Breaker. An
RCCB MUST be used when powering a

RCCB MUST be used when powering a

RCCB MUST be used when powering a ChromaBeam66 or

ChromaBeam66 or

ChromaFlood66/100R

ChromaFlood66/100R in wet environments.

in wet environments.

DMX In/Thru 5 Pin XLR Connectors

DMX In/Thru 5 Pin XLR Connectors
Digital Control Signals:

Digital Control Signals:

Digital Control Signals: Two 5 pin XLR connectors on 5m cables (in/thru)
are provided. The pin connections of the sockets are:

DMX SIGNAL

DMX SIGNAL
Pin 1 = Screen / Chassis Earth
Pin 2 = Signal ----

(Blue)

Pin 3 =

(White)

Pin 4 = no connection (Green)

Pin 5 = LVS (male only) (Red)

Wet / Damp Environme

Wet / Damp Environment Use

nt Use

nt Use – these products are

IP66 rated. However, the cable connections

must

must also be

contained in a dry, low humidity, environment as water and

vapour  will  travel  inside  the  cables  from  the  connection  joints  into  the
fixture.    A  waterproof  connection  box,  or  properly  fitted  IP68  rated
connectors,  are  essential  for  cable  connections  in  such  environments.
Suitable connectors are available from Pulsar.
Failure to take these precautions invalidates the guarantee.

Failure to take these precautions invalidates the guarantee.

CHROMA

CHROMABEAM66

CHROMA

CHROMAFLOOD66/100R

SPECIFICATION

CONNECTIONS

WET/DAMP PRECAUTIONS