HI1150 Hampton Wood Cast Insert |
23
maintenance
Secondary Air Tube Removal / Installation
1. Allow the stove to burn out and cool down, until cool to touch.
2. Open stove door to access secondary air tubes.
Note: to make it easier to remove the air tubes, first remove both the bottom
right base brick and right side wall brick.
3. Grasp front secondary air tube firmly with vise grips, using a hammer tap
vise grips from right to left until air tube is released from grip. Remove.
See Diagram 1.
4. Remove top left and right metal retainers, followed by the fragile three
piece C-Cast Baffles, then remove the remaining 2 tubes.
Secondary Air
Tubes
5. To reinstall or replace, first slide left side of tube into hole on left side air
channel. Align tab on right side air channel with notch on right hand end
of air tube. Firmly grip center of air tube with vise grips, use hammer to
tap vise grips from left to right until the tube bottoms out into the air
channel on right.
Note : If air tube is locked into place correctly there should be slight
movement when moving the air tube back and forth.
Diagram 1
Summary of Contents for HI1155
Page 32: ...32 HI1150 Hampton Wood Cast Insert warranty...
Page 33: ...HI1150 Hampton Wood Cast Insert 33 notes...
Page 34: ...34 HI1150 Hampton Wood Cast Insert notes...
Page 35: ......
