12
| HI1150 Hampton Wood Cast Insert
installation
918-745b
02/19/09
2
HI200
6)
Place ashlip over fan by fi tting it onto the fl ange on the fi rebox.
See Diagram 5 and 6.
Diagram 5
Diagram 6
Ashlip
Diagram 7
DO NOT ROUTE THE FAN POWER CORD
UNDER OR IN FRONT OF THE UNIT.
Do not turn the fan ON until your insert has reached
operating temperature or at least 30 minutes after
starting fi re.
8)
Surround adjustments can be made up or down, loosen 4 bolts
shown on face of unit (Diagram 7) and adjust.
Surround can also be adjusted left or right, loosen 4 bolts shown in
Diagram 3 - adjust surround left or right and retighten bolts.
Check that gaps around door are even and door closes properly.
9)
Completely slide unit into place - after all adjustments have been
made.
7)
Install door and close with caution - adjustments may be
necessary.
Installer:
Please record unit serial number here before installing blower.
Serial No.______________________________
Summary of Contents for HI1155
Page 32: ...32 HI1150 Hampton Wood Cast Insert warranty...
Page 33: ...HI1150 Hampton Wood Cast Insert 33 notes...
Page 34: ...34 HI1150 Hampton Wood Cast Insert notes...
Page 35: ......
