HI1150 Hampton Wood Cast Insert |
15
installation
Stainless Steel Smoke Deflector Installation
The stainless smoke deflector is located in the upper front area of the firebox. The deflector is held in place with 2 bolts
Prior to the first fire, ensure deflector is seated properly and secured with 2 hand tightened bolts which are accessible from behind the smoke deflector.
To replace the deflector, loosen both bolts and slide deflector downward; push deflector to the back wall of the unit and manoeuver out.
Install new deflector and hand tighten bolts.
Ensure positive location of the deflector prior to hand tightening.
WARNING:
Operation of the unit without proper installation of smoke deflector will void warranty.
Smoke deflector installed with 2 bolts.
Note:
This is a cutaway view from the
back of the unit
Smoke deflector is installed through the door opening in location shown in Diagram
Ensure deflector is seated so bolts are
seated
at the bottom of the slot before tightening.
Smoke Deflector
Summary of Contents for HI1155
Page 32: ...32 HI1150 Hampton Wood Cast Insert warranty...
Page 33: ...HI1150 Hampton Wood Cast Insert 33 notes...
Page 34: ...34 HI1150 Hampton Wood Cast Insert notes...
Page 35: ......
