5
HAMPTONBAY.com
Please contact 1-844-760-3644 for further assistance.
Installation (continued)
3
Testing the doorbell and push
button placement
Ƒ
Temporarily position the push button (B) and
doorbell (A) where they will be mounted.
Ƒ
Press the push button (B) to verify the
doorbell (A) and push button (B) work properly.
Ƒ
If the doorbell (A) does not sound, move the
doorbell (A) closer to the push button (B) and
test again.
NOTE:
Do not permanently mount the push button (B) or
doorbell (A) until they are working properly.
NOTE:
The push button and doorbell come synced from
the factory. The range of the wireless doorbell can vary
with location, temperature, and battery condition.
4
Mounting the push button
Use either screws (AA) or double-sided tape (DD) to
mount the push button (B).
Ƒ
To mount with screws (AA), remove the back
of the push button (B) by pushing in the tab
on the bottom with a small screwdriver. Place
the push button back on the door jamb and
mark the two screw holes. Drill two 1/16 in.
(1.5 mm) pilot holes. Attach with screws (AA).
Ƒ
When attaching the push button (B) with
double-sided tape (DD), remove the paper from
both sides of the double-sided tape (DD) and
apply to a clean surface.
Ƒ
Snap on the front of the push button (B).
NOTE:
Remove material in screw holes (if needed) before
mounting with screws.
5
Mounting the doorbell
Ƒ
Determine mounting location.
Ƒ
Drill one 7/32 in. (5.5 mm) pilot hole and insert
a wall anchor (CC).
Ƒ
Insert the screw (BB) into the wall anchor (CC)
leaving about 1/8 in. (3.2 mm) of the screw
threads exposed.
Ƒ
Using the keyhole on the doorbell back
plate (1), hang the back plate (1) on the
screw (BB).
Ƒ
Mark the second screw location in the slot in
the doorbell back plate (1). Remove the back
plate (1) from the keyhole screw (BB).
Ƒ
Drill one 7/32 in. (5.5 mm) pilot hole and insert
a wall anchor (CC).
Ƒ
Hang the doorbell back plate (1) on the keyhole
screw (BB) and insert the second screw (BB)
into the second wall anchor (CC).
Ƒ
Ensure the doorbell back plate (1) is level and
tighten the second screw (BB) securely.
A
1
B
AA
BB
CC
