6
Installation (continued)
6
Attaching the doorbell to the
back plate
Ƒ
Align the top edge of the doorbell (A) with the
top of the back plate (1).
Ƒ
Rotate the bottom of the doorbell (A) toward
the back plate (1) and snap into position.
Operation
1
Selecting a tune
The wireless push button (B) has two options for tune
selection: Play the selected “FRONT” door tune (Ding-
Dong) or play the “REAR” door designated tune (Ding)
Ƒ
The push button (B) comes from the factory
with no jumper (EE) installed on the pins.
This setting will play the “FRONT” door tune
(Ding-Dong).
Ƒ
To set the push button (B) to play the “REAR”
door tune (Ding), add the jumper (EE) to the
pins inside the push button (B).
NOTE:
All doorbell models are designed to work with up
to 5 wireless push buttons (sold separately).
NOTE:
All doorbells are designed to play only two
different tunes no matter how many push buttons are used.
Push button (B) set as
“FRONT” door (Ding-
Dong) – no jumper (EE) on
the pins (Factory Default)
Push button (B) set as
“REAR” door (Ding) –
jumper (EE) is on the pins
CR2032
CR2032
Care and Cleaning
Ƒ
Use a dry cloth to clean the doorbell and push button.
Ƒ
Do not use cleaners or polishes.
Ƒ
Do not use any fluids on the doorbell or push button.
EE
1
A
B
