background image

 

13

HAMPTONBAY.COM

Please contact 1-855-HD-HAMPTON for further assistance.

Operation (continued)

OPERATING YOUR FAN AND REMOTE CONTROL

3 SPEED

BRIGHTNESS

COLOR TEMP.

ON / OFF

ON / OFF

ALL

NOTE:

 

The fan will store the last used speed setting for the 

next time it is turned on.

Fan 

ON/OFF

 button: Press and release this button to turn the 

fan on or off. 

Light 

ON/OFF

 button: Press and release this button to turn the 

light on or off. 

NOTE: 

 The default temperature of the ceiling fan light is 

3000K (Soft White).

Correlated Color Temperature (CCT) changing.

Push and release the button to cycle through the three color 
temperature options.
Option 1: 3000K (Soft White).
Option 2: 4000K (Bright White).
Option 3: 5000K (Daylight).

Fan 

3 SPEED

 button: Press and release the “

+”

 button to 

increases the fan speed. Press and release the “

-”

 button to 

decreases the fan speed. 

Light 

BRIGHTNESS

 button: Press and hold the “+” button to 

increase the desired light level. Press and hold the “-” button 
to decrease the desired light level.

Power 

ALL

 button: Press and release the power button to turn 

the fan and light on or off. 

Power on/off 

Light on/off 

Fan on/off 

Fan on/
Increases/ 
decreases 
fan speed

Light on/
light dimming

Signal light

Light color 
temperature

Summary of Contents for AK401A-BN


















Reviews: