11
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Assembly — Attaching the Fan Blades
9
Insert the blade (G) through the slot in the housing. Align the
holes from the blade (G) to the holes from the fan motor
assembly (F), and secure the blade in place with blade
support plate with screws and lock washers (H) provided.
Repeat this procedure with the remaining blades (G).
or cleaning the fan.
WARNING:
To reduce the risk of personal injury, do not
bend the blades (G) while installing, balancing the blades (G)
or cleaning the fan.
WARNING:
Do not insert foreign objects between rotating
fan blades (G).
Attaching the fan blades
G
F
H
Assembly — Installing the Light Kit
10
Attaching the LED light kit to the
light kit mounting plate
While holding the 20W LED light kit (I) under the fan motor
assembly (F), snap together the wire connection plugs (LL) :
White to white
Black to black
Position the notches (MM) in the outer rim of the 20W LED
light kit (I) so they line up with the tabs (NN) on the inside of
the rim on the light kit mounting plate (OO). Carefully lift the
20W LED light kit (I) up inside the light kit mounting plate (OO)
and secure it to the fan by turning the 20W LED light kit (I)
clockwise until snug.
CAUTION:
Before starting installation, disconnect the power
by turning off the circuit breaker or removing the fuse at the
fuse box. Turning power off using the fan switch is not sufficient
to prevent electric shock.
NN
MM
I
OO
F
LL
NOTE:
If the light kit could be wobbled by hand, it means the
light kit is not twisted completely till the right position. Keep
twisting the light kit till it could not be wobbled by hand.
