Operation
Connect the polarized plug to a standard 110/120 V wall receptacle.
Turn the switch once to turn the light on medium.
Turn the switch again to cycle through the settings. The following is the switch sequence.
7
EXTERIOR MAINTENANCE
Disconnect the fixture’s plug from the wall receptacle.
Use a dry or slightly dampened clean cloth and wipe the
surface of the fixture.
Care and Cleaning
Troubleshooting
Problem
Solution
The light will not turn on.
Make sure the power supply is on.
Test or replace the switch.
Check the wiring.
Replace the light bulb.
NOTE:
Do not use any cleaners with chemicals,
solvents, or harsh abrasives. Use only a dry soft cloth
to dust or wipe carefully.
HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.
OFF
MED
HIGH
LOW
