1
Attaching the mounting bracket
Place the mounting bracket (EE) onto the desired location
and mark the location of the mounting holes.
Remove the mounting bracket (EE), drill appropriately sized
holes at the marked wall locations, and insert wall anchors
(DD) into the wall holes.
Replace the mounting bracket (EE) onto the desired
location.
Feed the mounting screws (CC) through the mounting holes
of the mounting bracket (EE) and thread them into the wall
anchors (DD).
Tighten the mounting screws (CC) until the mounting
bracket (EE) is securely flush against the wall.
5
2
Mounting the fixture
Place the main fixture body (C) over the mounting bracket
(EE).
Make sure the fixture screws on the mounting bracket (EE)
feed through the mounting holes of the main fixture body
(C).
Thread the lock nuts (BB) onto the fixture screws until the
main fixture body (C) is securely flush against the wall.
Installation
HAMPTONBAY.COM
Please contact 1-800-841-1350 for further assistance.
DD
EE
CC
BB
C
DD
EE
D
