Hammond Sk-series Manual Download

Page: 56 / 60

Drawbars & Percussion

PERCUSSION Edit Menu

This Advanced Feature Menu allows you to make various changes to the characteristics of the Percussion.

Accessing the PERCUSSION Edit Menu Using the MENU/EXIT Touch Button:

From any of the PLAY Mode screens, touch the MENU/EXIT Touch Button

once

. The Information Center

Display should now look like this:

The word “DRAWBAR” should now be blinking.

Touch the PAGE UP Touch Button

once

. The “B” screen of the MENU Mode will now display.

You will now see “CUST.TW" in the upper left corner of the Information Center Display, and it will be
blinking.

Touch the PAGE RIGHT Touch Button. The word, “PERCUSS” will now blink.

Touch the ENTER Touch Button.

Accessing the PERCUSSION Edit Menu Using the Shortcut:

Touch and hold any of the four PERCUSSION Touch Tabs. After approximately 1 second, you will see the screen
shown below on this page.

You are now in the PERCUSSION Edit Page. You may now use the PAGE NAVIGATION Touch Buttons in conjunction
with the VALUE Rotary Control to make various changes to the Percussion. These changes are explained starting on the
next page.

Summary of Contents for Sk-series





























































Search results

Summary of Contents for Sk-series

Reviews:

Related manuals for Sk-series

Brands by name

Popular brands

Hammond Sk-series, Manual

Search results

Summary of Contents for Sk-series

Reviews:

Related manuals for Sk-series

Brands by name

Popular brands