manualshive.com logo in svg

Hammond Sk-series, Manual

Share
Download
Hammond Sk-series Manual Download Page 25

Drawbars & Percussion          

23

If you followed the steps described on the previous page to get to the screen shown below, the word underneath the word
“PEDAL” should be blinking.  If it is not, touch the PAGE LEFT Touch Button repeatedly until it is.

DRAWBAR Edit Menu PEDAL - Page 1 - Pedal Voicing

This Advanced Feature allows you to change the overall sound of the Pedal Drawbar tones.  The data chart below shows the
options you may select.

PEDAL DRAWBAR VOICING Options

Description

Function

Norm

The Pedal voicing of a vintage Hammond Organ.

Muted

Very mellow Pedal tones.

Synth1

A sawtooth waveform with a “wow” type filter envelope.

Synth2

A dull square wave, or “clarinet” type sound.

Turn the VALUE Rotary Control to select the Pedal Voicing that you prefer.

DRAWBAR Edit Menu PEDAL - Page 1 - Pedal Attack/Key Click

From the previous screen, touch the PAGE RIGHT Touch Button once.  The words just underneath the word
“ATTACK” should now be blinking.

This Advanced Feature allows you to change the type of Attack for the Pedal tones that you prefer.  The data chart below
shows the options you may select.

DRAWBAR PEDAL ATTACK Options

Description

Function

SLOW ATTK

No click and a slow attack.

NO CLK

An instant attack but no click.

SOFT CLK

An instant attack ad s soft click.

NORM CLK

An instant attack and a normal amount of click.

MAX CLK

An instant attack and the maximum amount of click.

Turn the VALUE Rotary Control to select the Pedal Attack that you prefer.

Summary of Contents for Sk-series





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands