manualshive.com logo in svg

Hammond Sk-series, Manual

Share
Download
Hammond Sk-series Manual Download Page 53

Drawbars & Percussion          

51

PIPE Edit Menu - Page 3

From the previous screen, touch the PAGE RIGHT Touch Button once.  Page 3 of the PIPE Edit Menu should now
display.  The legend below the word  “DIR” (Direction) should now be blinking.

Pipe Voice Pan

This Advanced Feature allows you to simulate different placements of pipe ranks.

Select the directionality you want by doing the following:

Turn the VALUE Rotary Control to the 

right

 to move the sound of the selected Pipe Voice 

left

.

Turn the VALUE Rotary Control to the 

left

 to move the sound of the selected Pipe Voice 

right

.

NOTE:  

Setting this parameter to “-C-" will locate the sound in the center.

From the previous screen, touch the PAGE RIGHT Touch Button once.  The legend below the word  “IMG” (Image)
should now be blinking.

Pipe Voice Imaging

This Advanced Feature allows you to simulate different arrangements of pipes.

What Is “Pipe Imaging?”

The pipes of a pipe organ are arranged into sets called 

ranks

.  Each ranks consists of pipes representing a specific sound on

the organ - Open Diapason, Trompette, etc.  (In keeping with the different philosophies of organ sound, many organ stop
names are of European origin; hence the use of French, German, Dutch, etc.)

The pipes of each rank are supported by an assembly called a 

chest

.  The pipes can be arranged in many different ways on

the chest.  The pipe arrangement chosen by the maker depends on several things - aesthetics, musical, etc. - but the four most
common ones are shown on the next page.

Summary of Contents for Sk-series





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands