manualshive.com logo in svg

Hammond Sk-series, Manual

Share
Download
Hammond Sk-series Manual Download Page 41

Drawbars & Percussion          

39

Naming a Custom Tone Wheel

TRY THIS:

1.

Access the CUSTOM TONE WHEEL Edit Menu using the procedure described on page 32.  You should now
see Page 1 of the CUSTOM TONE WHEEL Edit Menu.

2.

Use the PAGE UP and PAGE DOWN Touch Buttons to select the Custom Tone Wheel you want to rename.

3.

After you have made your selection, Name your Custom Tone Wheel by doing the following:

Use the PAGE LEFT and PAGE RIGHT Select Touch Buttons to select the character to be edited.

Turn the VALUE Rotary Control to the 

right

 to scroll 

forward

 through the characters.

Turn the VALUE Rotary Control to the 

left

 to scroll 

backward

 through the characters.

The available characters include: Punctuation Marks (space - . ‘ &), Numeric Characters (0 ~ 9), Upper-
case Letters (“A ~ Z”), and Lower-case Letters (“a ~ z”).

4.

After you have finished editing, Touch and Release the RECORD Touch Button.

The Information Center Display should now look similar to this:

5.

If you DO NOT wish to save the parameters you have changed, touch the MENU/EXIT or PLAY Touch
Button.

If you want to overwrite the Custom Tone Wheel with your new edited settings, touch the ENTER Touch
Button.  The bottom line of the Information Center Display will scroll the following:

Recording...

After the above stops scrolling, your Custom Tone Wheel has been renamed.

Summary of Contents for Sk-series





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands