![background image](http://html1.mh-extra.com/html/hammer/fp-series/fp-series_operating-and-maintenance-manual_3458592016.webp)
16
Ed. 01/18 Rev. 00
FIXED CRUSHER FP SERIES
A
B
F1
F2
F3
2.8 DESCRIPTION OF THE EQUIPMENT
The HAMMER CRUSHER of the FP series, mounted on the excavator arm, makes it possible to crush
construction materials and shear any reinforcing rods present in the structures to be demolished. The
HAMMER FP CRUSHER, designed for secondary demolition activities, is characterized by one only
movement, i.e. opening/closing of the jaw.
The CRUSHER must be connected to the excavator’s hydraulic circuit, which will control its movements.
2.9 INTENDED USE AND LIMITS OF USE
The HAMMER FP CRUSHER is intended exclusively for the crushing of construction material, including
the cutting of metal reinforcements located inside the concrete. Any other use is to be considered
NOT COMPLIANT with the Manufacturer’s instructions.
2.10 TECHNICAL SPECIFICATIONS OF HAMMER CRUSHERS
The technical specifications of the HAMMER CRUSHERS of the FX Series are shown in the following table: