10
Open the fuel tank ventilation, then fill the fuel tank(s) with fuel containing
approximately 5 % of AeroShell 500 or AeroShell 560 oil
Have a CO2 fire extinguisher at hand!
Turn on the R/C transmitter, and then turn on the receiver.
Place your aircraft model with the nose into the wind.
Start the jet engine (keep a safe distance, see page 6!):
1. Throttle down + trim down => remove LOCK
2. Trim up => RUN – cleared
3. Throttle up and down again => AUTOSTART activated, see EDT
display.
Checklist for Turning the Engine Off
Place the aircraft model with the nose against the wind.
Turn the jet engine off: Throttle down + trim down (below 25%) => -OFF
Wait until the automatic cool-down procedure of the engine is finished.
Check the INFO data about the operating states (see page 14 ff).
After finishing the flight activities, remove all fuel from the tank(s) and close
the fuel tank ventilation.
