68
9 Troubleshooting
General Troubleshooting Overview
The most common problems, which cause the print server to perform improperly, are
covered in this chapter. If a problem still exists after reading this chapter, please contact
your dealer for technical support.
LED Light Indicators
The print server is equipped with LED lights to assist in diagnosing problems that are the
result of the network and/or the print server hardware itself.
Status (Orange)
When the
print server unit is powered on, the
Status
LED will flash five times as part of the
unit’s
P
ower
O
n
S
elf
T
est (
POST
). This indicates that the print server hardware is properly
configured.
Note
: Make sure that the LED flashes five times (POST) upon connecting the power. If the
unit does not flash five times, contact your dealer for a replacement or repair.
WLAN (Orange)
When the WLAN enabled, the LED will be on. When transmitting data, it will be blinking.
USB (Green)
Print server is being connected with USB printer.
Power Related Problems
The print server requires an external AC power adapter in order for it to function. If you
have a power problem, check to see whether the power cord or its connectors are
damaged. More importantly, check to see that the AC power adapter included with the print
server matches the AC voltage in your country or area. Using an incorrect AC adapter will
damage your print server.
Print Port Related Problems
Printing data failure may be caused by a loose connection of the print server to the USB
port of the printer. Check to see if any of the pins on the USB connector are damaged. In
addition, check the cable connection. If the pins are damaged, contact your dealer for a
replacement connector.
