50
snmp.snmpEnableAuthenTraps
Enables or disables the function of sending SNMP
Authentication Failure trap message to the network
administrator, if the community name within a SNMP
request is not correct.
Users can set up print server’s SNMP functions by using their browsers.
1. Click
Setup
, it then appears the sub-menu.
2. Click
SNMP
, it then as shown in the following picture.
SNMP Community:
The print server supports up to two community names. The default
community name is
public
(case-sensitive), with
Read Only
access right in default.
Support HP WebJetAdmin:
This option allows user determine to disable/enable the
Support HP WebJetAdmin.
SNMP Traps:
Enable the function of sending SNMP Authentication Failure trap message
to the network administrator, if the community name within a SNMP request is not correct.
