44
TCP/IP Setup
1. Click
Setup
, it then appears the sub-menu.
2. Click
TCP/IP
, it then as shown in the following picture.
DHCP/BOOTP:
This option allows you to select DHCP/ BOOTP option.
If there is a
DHCP/BOOTP server on your network. This option allows the print server to obtain
IP-related settings automatically from your DHCP server.
IP Address:
This option allows you to input IP address from the print server. The IP
address must meet the IP addressing requirements of the network segment.
Note:
On the TCP/IP Setup screen, specify a fixed IP address is highly recommended.
Subnet Mask:
This option allows you to input subnet mask from the print server. The IP
address must meet the IP addressing requirements of the network segment.
Default Router
: This option allows you to input gateway from the print server. This IP
address of gateway must meet the router or gateway to go across of the network segment.
