52
6 Network
Print Monitor
Preparation
The print server supports
TCP/IP
,
IPX/SPX
and
NetBEUI
protocols under Microsoft
Windows system. Please make sure that the following steps have been completed before
proceeding with installation under Microsoft Windows 95/98/ME/NT4/2000/XP 32bit edition
or server 2003 32bit edition.
Select A Desired Protocol
TCP/IP
The TCP/IP Protocol must be installed. For further information, please read “TCP/IP
Protocol Installation” section in this chapter.
Note
: If TCP/IP protocol is chosen, please refer to “Assigning an IP Address to the print
server” section later in this chapter.
IPX/SPX
The IPX/SPX-compatible Protocol must be installed. For further information, please read
“IPX/SPX-compatible Protocol Installation” section in this chapter.
NetBEUI (Windows 9x/ME/NT4/2000)
The NetBEUI protocol must be installed. For further information, please read “NetBEUI
Protocol Installation” section in this chapter. The Microsoft Windows XP/2003/Vista/7 does
not support the NetBEUI printing.
TCP/IP Protocol Installation
1. Click
Start
, point to
Settings
and select
Control Panel
.
2. Double click the
Network
icon.
3. If the
TCP/IP
Protocol
is not already installed, click
Add
.
4. Select
Protocol
and click
Add
.
5. Select
Microsoft
from the
Manufacturers
list.
6. Select
TCP/IP
Protocol
from the
Network Protocols
list.
7. Specify an IP address, Subnet Mask, and Gateway address or specific “Obtain IP
address automatically”, if a DHCP server is available on the LAN.
8.
Restart the computer.
9. Done.
