9
Troubleshooting
Iron won’t heat.
• Is Iron plugged in and the outlet working? Check outlet by
plugging in a lamp.
• Has Temperature Control Dial been turned to a fabric setting?
Water is leaking out of the Iron.
• Do not overfill Removable Water Tank.
• If steam ironing, is Adjustable Steam Switch in the STEAM ( )
position, has a temperature been selected, and did Iron have
enough time to preheat? Allow Iron to preheat for 2 minutes
before using.
• If dry ironing, make sure Adjustable Steam Switch is in the
NO STEAM ( ) position.
Iron won’t steam.
• Check water level.
• Has Iron had enough time to preheat? Allow Iron to preheat for
2 minutes before using.
• Is Adjustable Steam Switch in the STEAM ( ) position?
Iron leaves spots on clothing.
• ALWAYS empty Removable Water Tank after using. Water left in
tank may discolor clothing and Soleplate.
Wrinkles not removed.
• Choose correct temperature setting for your fabric. See Fabric
Setting Chart and Garment Label Symbols.
Fabric/clothing scorched.
• Select a lower temperature setting. Allow Iron to cool for 5
minutes before continuing.
Twisted Cord.
• If Cord becomes twisted, turn Iron OFF and unplug. Let cool.
Empty any water from Iron. Hold Cord in the middle of entire
length. Let plug and Iron dangle freely until Cord uncoils. This will
extend the life of your Cord.
840302500 ENv06.indd 9
7/20/18 9:49 AM
