7
Cleaning
1. Unplug from outlet.
2. Unscrew the Ring Nut and remove all parts from the
Grinder Head.
3. To remove the Grinder Head, push the lever on
the Cam Action Lock up, unlocking the Grinder Head,
and remove the Grinder Head by pulling it straight out
(
FIGURE A
).
4. Wash all parts that come in contact with food in hot
soapy water by hand. Dry immediately. The Grinding
plates should be cleaned after each use, otherwise the
residue will block the holes and it’s difficult to clean
when dry. The Grinder parts are not dishwasher safe.
Do NOT use bleach.
NOTE:
Be careful when washing. The grinder knife
that may hurt hands. Rinse with clear water.
5. Fully lubricate the Grinder Head, Grinding Plates
and the Knife with food grade silicone spray before
and after each use.
6. Clean the Main Body with a soft damp towel. Dry
immediately. DO NOT immerse the Main Body of the
Grinder in water or other liquids.
Cam Action Lock
ELECTRICAL SHOCK HAZARD: Disconnect power before
cleaning, disassembling or assembling. Do not immerse cord, plug or motor in
water or other liquid.
!
WARNING
FIGURE A
