Hamilton Beach Professional 58915-TW, Use And Care Manual

Page: 9 / 24

9
• For soup and soymilk: It is recommended to either blend
ingredients first and then cook in stovetop pot OR cook in stovetop
pot first and then blend ingredients.
• To add foods when blender is operating, remove filler cap and add
ingredients through the opening.
• For best performance, the minimum amount of liquid needed per
recipe is 1 cup (8 ounces/237 ml). Add more liquid if food is not
blending properly. The amount of liquid needed will vary based on
the other ingredients required for blending.
• If blending action stops during blending or ingredients stick to sides
of jar, insert tamper to help move the mixture around or add more
liquid to blender jar.
• Do not store food or liquids in blender jar.
• Avoid bumping or dropping blender jar when in operation or at any
time.
• Use tamper when making nut butters and blend in 1-minute
intervals.
• Cutting large whole fruits and vegetables may allow them to blend
more quickly.
• Do not fill blender jar past highest graduation marking.
• Always place liquid in blender jar first, then remaining ingredients.
• If ice or frozen fruit pieces are not blending, stop the blender and
pulse a few times.
• Do not allow ice to stand or freeze in jar. Immediately crush ice
after placing in jar.
NOTE : This machine is equipped with motor overload protection.
If the motor stops during operation due to overheating, unplug and
allow it to cool down for approximately 15 minutes. Plug machine
back in to resume normal operation.
Blender Tips
Using the Tamper
• The hand protector on the tamper and the lid work together to
prevent the tamper from hitting the blades when the lid is secured
properly on the blender jar.
• The blender jar should not be more than two-thirds full when the
tamper is used during blending.
• Only use the tamper provided with this model blender. Do not use
tampers made for any other blender or blender model.
• If food does not circulate, an air bubble may be trapped in the
mixture. Remove the blender jar from the blender base. Remove
the filler cap. Release the air bubble by inserting the tamper
through the filler cap opening.
• Holding the tamper straight down may not help ingredients
circulate. If necessary, point the tamper toward the sides or corners
of the blender jar. DO NOT try to force the tamper deeper into the
jar.