Hamilton Beach Professional 58915-TW, Use And Care Manual

Page: 3 / 24

3
23. CAUTION! In order to avoid a hazard due to inadvertent resetting
of the thermal cut-out, this appliance must not be supplied
through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the
utility.
24. Do not operate more than 3 minutes ON at a time.
SAVE THESE INSTRUCTIONS
Other Consumer Safety Information
This appliance is intended to be used in household and similar
applications such as:
– staff kitchen areas in shops, offices, and other working
environments;
– farm houses;
– by clients in hotels, motels, and other residential-type
environments;
– bed and breakfast-type environments.
w WARNING Electrical Shock Hazard:
This appliance is provided with a grounded (3-prong) plug to
reduce the risk of electric shock. The plug fits only one way into
a grounded socket. Do not defeat the safety purpose of the plug
by modifying the plug in any way or by using an adapter. If the
plug does not fit into the socket, have an electrician replace the
socket.
The length of the cord used on this appliance was selected to
reduce the hazards of becoming tangled in or tripping over a
longer cord. If a longer cord is necessary, an approved extension
cord may be used. The electrical rating of the extension cord
must be equal to or greater than the rating of the appliance. The
extension cord must be a grounding-type, 3-wire cord. Care
must be taken to arrange the extension cord so that it will not
drape over the countertop or tabletop where it can be pulled on
by children or accidentally tripped over.
If the cutting blade assembly locks and will not move, it will
damage the motor. Do not use. Call the toll-free customer service
number for information.
Do not place blender jar in the freezer filled with food or liquid.
This can result in damage to the cutting blade assembly, jar,
blender, and possibly result in personal injury.
NOTE: This machine is equipped with motor overload
protection. If the motor stops during operation due to
overheating, unplug and allow it to cool down for approximately
15 minutes. Plug machine back in to resume normal operation.