8
1.
Place a cup under the outlet on
the bottom of the Head to collect
juice. Place a cup or container
under the Waste Valve to collect
pulp (FIGURE 6).
2.
Fill the Head with
wheatgrass.
3.
Make sure the Power
Switch is in the “OFF”
(
O
) position. Connect
the Power Cord on
the Juicer Motor to an
electrical outlet.
4.
Turn the Wheatgrass
Juicer “ON” by pushing
the Power Switch to
the “Forward” position.
5.
Use the Stomper to push
wheatgrass into the Head. DO
NOT use your fingers to push
wheatgrass into the Head!
6.
Add wheatgrass to the Head as
needed to keep juice flowing. Always be careful. Keep your fingers clear of the
Head Opening.
7.
Turn the Wheatgrass Juicer “OFF” (
O
) and disconnect the Power Cord from the
electrical outlet when you are done.
FIGURE 6
Head
Opening
KEEP FINGERS
CLEAR!
Waste
Valve
Juice
Outlet
Power
Switch
OPERATING INSTRUCTIONS
w
WARNING
Electrical Shock Hazard.
Disconnect power before
cleaning, disassembling, or assembling. Do not immerse cord, plug, or motor
in water or other liquid.
w
WARNING
Cut and Crush Hazard.
•
Never operate Wheatgrass Juicer unless it is fully and properly assembled.
•
Never reach into any inlet or outlet.
•
Only use the stomper to push wheatgrass into the Head.
•
Read and understand all information in this manual before use.
Summary of Contents for HWG800
Page 11: ...11 NOTES...