44
Configuring the Hardware and Utility Settings
1.
Insert the A-910-ZB dongle into any unused USB port (see Figure
46). The computer should automatically assign a COM port
number to the dongle.
2.
Start the A-910 Utility Software. The software should display the
COM port assigned to the A-910-ZB dongle (see Figure 47). If the
utility does not automatically detect the COM port, it must be
manually selected.
3.
The Target System ID or R-1307 CH (channel) is the number
associated with the A-1519/1520 targets or R-1307 Readout. If
using both the A-1519/1520 and an R-1307 Readout, both need to
be set to the same System ID and channel (see Figure 48). For
further information, see
Manually Selecting the COM Port
on
Page 45.
Figure 47 –
A-910 Utility showing the COM Port, System ID and Channel settings
Figure 48 –
System ID Setup
Figure 46 –
A-910-2.4ZB Dongle
