22
Updating the Firmware
Figure 38 –
Menu Buttons in Configuration Mode
1.
Log in with a Power User or Administrator access level.
2.
If the target is in Application Mode, select
Reboot to Configuration Mode
as shown in Figure 31.
3.
Wait for the utility to re-acquire the target.
4.
Click
Firmware
. You will be prompted to locate the firmware file. Firmware update file names are
prefixed with
A-1519/1520
and have an extension of
.hfw
. For example, firmware revision 7.35
would have a file name of
A-1519/1520_Firmware_V7_35.hfw
.
5.
Locate the A-1519/1520 Type II firmware update file and click
OPEN
.
6.
Wait for the utility to finish processing the file for uploading to the target (see Figure 40).
When the file processing completes, verify that
you want to update the target firmware with the
specified file version (see Figure 39). The
firmware version that is presently installed in
the target is shown in the Target Properties
area of Figure 40. In that example, the target is
using firmware version 7.033. Click
YES
to
upload the new firmware version, or click
NO
if the file version is lower or the same as the
target version.
Figure 39 –
File version upload confirmation
Figure 40 –
Loading and preparing firmware file for upload to target
WARNING!
•
The Configuration Utility is designed to be used with a USB cable
only
. Do not
attempt to upload firmware or make configuration changes wirelessly. Doing so
could damage the target.
