HAMAMATSU
MCD CONTROLLER C7557
Chapter1 Hardware
- 12 -
Connection
Front panel
①
SIGNAL I/O
Connect the "SIGNAL I/O" to multi-
channel detector head "SIGNAL I/O".
②
TE CONTROL I/O
Connect the "TE CONTROL I/O" to multi-
channel detector head "TE CONTROL I/O".
Rear panel
①
LINE
Connect power cable provided.
②
RS-232C
RS-232C interface for communicating with
a personal computer or a multichannel
detector head. Connect to a personal
computer “Serial port” or a multichannel
detector head “RS-232C” with RS-232C
cable.
③
SCSI
SCSI interface for communicating with a
personal computer. When single-end used
the C7557, don't open the another port. It
necessary SCSI terminator attached.
④
TRIG. IN
Connect to an external measuring
instrument with BNC-BNC cable.
⑤
PULSE OUT
Connect to an external shutter or an
external lump with BNC-BNC cable.
⑥
VIDEO OUT
Connect to an external
measuring
instrument (ex. Oscilloscope).
⑨
SYNC.OUT
Connect to an external measuring
instrument (ex. Oscilloscope).
