HAMAMATSU
MCD CONTROLLER C7557
Chapter1 Hardware
- 15 -
Timing chart
Internal synchronization measurement
When measuring the spectral of a steady light with this system, use internal
synchronization measurement. See timing chart below.
Timing chart of internal synchronization measurement
Method
1) Operation
Set Trigger MODE to Internal and the Number of
Cycle from the application software. Next measure
the data using the data measurement function.
Not avairabl e data
DATA OUT
Avairabl e data
When the data measurement button START is pressed, the next data are val id.
START
Data measurement button START
press timing
1EVENT
Timing chart of internal synchronization measurement
[
Measuring the spectral of a steady light
]
