HAMAMATSU
MCD CONTROLLER C7557
Chapter1 Hardware
- 11 -
Nomenclature
Front panel
①
POWER
Power indicate LED.
②
SIGNAL I/O
Connector for control of a multichannel
detector head.
③
TE CONTROL I/O
Connector for cooling control and power
supply for FAN.
Rear panel
①
LINE
Power input connector and power control
switch. ”I” means that the system power is
turned on. ”O” means that the system
power is turned off.
②
RS-232C
RS-232C interface for communicating with
a personal computer or a multichannel
detector head.
③
SCSI ID
Dip switch for setting SCSI ID number.
④
SCSI
SCSI interface for communicating with an
personal computer.
⑤
TRIG. IN
BNC
receptacle for external trigger input.
⑥
PULSE OUT
BNC
receptacle for pulse output to drive
external shutter or external lump.
⑦
VIDEO OUT
BNC
receptacle for video signal output to
observe with an external analyzer(ex.
Oscilloscope).
⑧
SYNC. OUT
BNC
receptacle for start signal output. It is
synchronized with VIDEO OUT, so that it
is available for trigger to an external
analyzer(ex. Oscilloscope).
