Hamamatsu Photonics C15550-20UP Instruction Manual Download Page 72

Page: 72 / 72

qCMOS Camera C15550-20UP / C15550-20UP01 Instruction manual_Ver.1.3

17. CONTACT INFORMATION

Manufacturer

HAMAMATSU PHOTONICS K. K., Systems Division

812 Joko-cho, Higashi-ku, Hamamatsu City, Shizuoka Pref., 431-3196, Japan
Telephone (81) 53-431-0124, Fax: (81) 53-435-1574

E-mail:

[email protected]

Local contact information worldwide can be found at

www.hamamatsu.com



The contents of this manual are subject to change without notice.



The unauthorized duplication or distribution of all or part of this manual is strictly

prohibited.



If one of the following is found, please contact Hamamatsu. (refer to the local

contact information).

Contents of the manual are illegible, incorrect or missing.

Pages of the manual are missing or in the wrong order.

The manual is unclean.

Summary of Contents for C15550-20UP









































































Search results

Summary of Contents for C15550-20UP

Reviews:

Related manuals for C15550-20UP

Brands by name

Popular brands

Hamamatsu Photonics C15550-20UP, Instruction Manual

Search results

Summary of Contents for C15550-20UP

Reviews:

Related manuals for C15550-20UP

Brands by name

Popular brands