Hamamatsu Photonics C15550-20UP, Instruction Manual

Page: 65 / 72

qCMOS Camera C15550-20UP / C15550-20UP01 Instruction manual_Ver.1.3
63
(2) Functional specifications
Sensor mode Area readout / Lightsheet readout / Photon number resolving * 1
Readout mode Full resolution readout / Binning readout *
2
/ Sub-array readout *
3
Exposure time Refer to [Available setting range of the exposure time] (P.64)
Readout time * 4, 5
Standard scan 8.330 ms
Ultra quiet scan 199.9 ms
Frame rate Refer to [Frame rate](P.64)
Lightsheet readout mode
Variable row interval time
(1H)
Available: 7.2 µs to 237.6 µs
Readout time * 4 8.330 ms to 274.9 ms
Readout direction Top to bottom readout / Bottom to top readout
External trigger input mode
Area readout mode /
Photon number resolving
mode
Edge trigger / Global reset edge trigger /
Level trigger / Global reset level trigger /
Synchronous readout trigger / Start trigger
Lightsheet readout
mode
Edge trigger / Start trigger
Software trigger mode
Area readout mode /
Photon number resolving
mode
Edge trigger / Global reset edge trigger /
Start trigger
Lightsheet Readout
Mode
Edge trigger / Start trigger
External trigger input connector External input (SMA connector)
External trigger input level
TTL / 3.3 V LVCMOS
External trigger input polarity Negative / Positive
External trigger input delay 0 µs to 10 s (1 µs step)
Trigger times
(Synchronous readout trigger)
1 to 10 000
Trigger output
Global exposure timing output / Any row exposure timing output /
Trigger ready output / 3 programmable timing outputs / High output /
Low output
Trigger output level 3.3 V LVCMOS
Trigger output polarity Negative / Positive
Programmable timing output
Reference signal Read End / Hsync * 6 / Vsync / Trigger
Delay 0 µs to 10 s (1 µs step)
Pulse width 1 µs to 10 s (1 µs step)
Master pulse mode
Pulse mode Free running / start trigger / burst
Pulse interval time 5 µs to 10 s (1 µs step)
Pulse burst number 1 to 65 535
Digital output 16 bit / 12 bit / 8 bit
Image processing function * 7
Dark offset correction (Always on)
Pixel gain correction (Always on)
Defect pixel correction (ON or OFF, hot pixel correction 3 steps)
Interface CoaXPress (Quad CXP-6) / USB 3.1 Gen 1
*
1 Readout time, Exposure time and frame rate when using photon number resolving mode are as same as that of Area readout
mode.
*
2 Digital binning, 2×2, 4×4. At Area readout mode and photon number resolving mode.
*
3 Minimum settable step of the size and position are as follows: It is in only the case that the camera is used with DCAM-API.
Horizontal size Vertical size Horizontal position Vertical position
Area readout mode 4 pixel steps 4 line steps 4 pixel steps 4 line steps
Lightsheet readout mode 1 pixel step 4 line steps 1 pixel step 4 line steps
Camera only 256 pixel steps 4 line steps 4 pixel steps 4 line steps
*
4 At full resolution reatout.
*
5 Valid 4 digits and rounded up to 5th digit.
*
6 At Lightsheet readout mode.
*
7 At Area readout mode and Light sheet readout mode.