6
G
Operating Instructions
Thank you
for choosing a Hama product.
Take your time and read the following instructions
and information completely. Please keep these
instructions in a safe place for future reference. If
you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of warning symbols and notes
Warning
This symbol is used to indicate safety instructions
or to draw your attention to specific hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package contents
•
1x Universal Smartphone Bike Holder
•
these operating instructions
3. Safety instructions
•
Use the product only for the intended purpose.
•
Protect the product from dirt, moisture and over-
heating and use it in dry environments only.
•
When using this product, observe the applicable
local traffic laws and regulations.
•
Do not drop the product and do not expose it to
any major shocks.
•
Keep the packaging material out of the reach of
children due to the risk of suffocation.
•
Dispose of packaging material immediately in
accordance with the locally applicable regulations.
•
Do not modify the product in any way. Doing so
voids the warranty.
Warning - risk of injury
•
While driving a car or using sports equipment,
do not allow yourself to be distracted by your
product and keep an eye on the traffic situation
and your surroundings.
•
The product is not intended for mounting
on carbon components (e.g. handlebars).
Carbon components can be damaged by the
clamp, break, and subsequently cause serious
accidents and injuries.
4. Installation
Note
•
Never apply force when using the product or
during installation.
•
Please note that smartphones and similar
devices are attached without securing with
the silicone mesh at the user's own risk. Only
by securing them with the silicone mesh is
a secure grip of the smartphone and similar
devices guaranteed.
4.1 Mounting the clamp
•
Turn the setting screw to secure clockwise until
the clamp sits securely on the handlebars without
sliding around. (
A
)
4.2 Inserting / removing the smartphone
•
Press the unlock button on the smartphone holder
to open the holding jaws (
B
).
•
Insert the device and fix it in place by pressing the
holding jaws together (
C
).
•
Hang the elastic silicone mesh over all four
corners of the smartphone to secure your device
in place (
D
).
Note
Always check that the smartphone holder is
secure.
5. Warranty disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use of
the product or from failure to observe the operating
instructions and/or safety notes.