Instruction Manual for DR-20 DSL/Broadband Router
09.6.2005
Art. Nr. 00049079
Seite 2
Rear view of DR-20 DSL/broadband router
DC In:
Connection for the supplied power supply unit
USB Printer: USB printer port for connecting your printer using a USB cable
1 – 4:
Network cable connection of the computer or switch/hub
WAN:
For connecting the external DSL modem using a network cable
Reset:
If you hold Reset pressed longer than 5 seconds, the router is automatically reset to
the factory settings.
The hardware installation is now complete.
2.
Installing the Software
The TCP/IP protocol
must be installed on all PCs or notebooks that are to use the Internet. By
default, the IP address
192.168.1.1
and an
activated DHCP server
are configured for the router.
That means that the connected PCs are automatically given
appropriate addresses
and
other
settings
. We recommend using these. Select the
TCP/IP setting Get IP address automatically
for
all PCs or notebooks connected to the router. You can then configure the router
using the web
browser
. The browser must be
Java-capable
and the Java function must be activated (e.g. Internet
Explorer 5.5 or higher, or Netscape 7.0 or higher, Opera 6.0, Firefox 1.0, etc.).
To start the configuration process, open your browser and enter
192.168.1.1
as the address. The
login window
is displayed.
The preset username is:
admin
password:
admin
After making the entry, click
OK
. The
Basic Setup DHCP
window opens.
The router must now be configured for the corresponding
ADSL protocols
. Access via
PPPoE
(Germany), PPTP (Austria) and Static IP
is described in the following pages. If you are not sure
which
ADSL protocol
you must use, contact your Internet provider.
Access via PPPoE:
