background image

Instruction Manual for DR-20 DSL/Broadband Router 

09.6.2005 

 

       Art. Nr. 00049079 

 

Seite  24 

 

covered by the terms of this warranty. A valid sales receipt accompanied by a 
brief description of the nature of the fault must be presented for any claims made on the warranty. 

This device is packaged with great care. Freight and postage is free of charge. Any claims made on 

the warranty do not increase its period of validity nor result in the issue of a new guarantee. 
 

Support Information:

 

 
If products are defective: 

Please visit your dealer if you have any product claims. 
 

Internet/World Wide Web:

 

Product support, new drivers or product information can be found at 

www.hama.de

 

 

Support Hotline – Hama Product Consulting:

 

Tel. +49 (0) 9091 / 502-115 
Fax  +49 (0) 9091 / 502-272 

E-mail: 

mailto:[email protected]

 

 

Postal address:

 

Hama GmbH & Co. KG 
P.O. Box 80 

86651 Monheim/Germany 

 

Note on environmental protection:

 (Electronic Device Law for products without rechargeable 

batteries and batteries) 
 

At the end of its service life, this device may not be disposed of with normal household waste, but 

rather must be brought to a collection point for recycling electric and electronic devices. 
 

By recycling, reusing the materials or other forms of utilising old devices, you are making an 

important contribution to protecting our environment. 
Please consult your local government officials for the qualified disposal facility. 

 

CE symbols and crossed out waste containers! 
 

 
 

 

 

Summary of Contents for DR-20


























Reviews: