32
d
Bedienungsanleitung
Important note for T-Online users:
Please enter your T-Online access data in the following order in the
Username fi eld:
“A”
represents the 12 characters of your connection ID,
“T”
is the corresponding T-Online number and
“M”
stands for the 4-digit user
suffi x. This is followed by the character string:
@t-online.de
.
If your T-Online number contains fewer than 12 characters, enter the # symbol before the user suffi x.
AAAAAAAAAAAATTTTTTTTTTT#[email protected]
Encapsulation:
PPPoE LLC for T-COM DSL connections in Germany
The Hama ADSL2+ WLAN Modem Router supports the following encapsulation protocols: PPPoE LLC, PPPoE VC-Mux, PPPoA LLC
and PPPoA VC-Mux. If you are not sure which protocol you need for your Internet connection, consult your DSL provider.
Bridge Interface:
Deactivated
This function should only be activated if you want to use the ADSL2+ WLAN Modem Router as an ADSL modem only, and you want/
have to switch off the router function.
Click ->
SAVE
at the bottom of the window to save your settings.
6.4 Connection setting (DSL connection setting)
In the following settings (Connection), you
can choose between Always On and Connect
On-Demand.
Always On:
The Internet is permanently con-
nected. Connection costs may be high if you are permanently connected to the Internet and have a pay-as-you-go payment plan.
Connect On-Demand:
The
“Connect On-Demand”
setting is recommended if you have a pay-as-you-go payment plan (if you pay
according to volume or time). This means that the Internet connection is disconnected automatically after the period set in the
“Close
if idle for XY minutes”
fi eld.
Connect Manually:
With this option, the modem router connects only after manually activating the connection via the user interface
shown above.
Important:
Please also note that closing the browser does not automatically disconnect you from the Internet. A number of programs send
queries to the Internet or receive data without it being clearly visible to the user. For the router, these requests are just as valid as
opening a browser, for example. If you want to ensure that there is no active connection to the Internet, you should switch off the
device.
Click ->
SAVE
at the bottom of the window to save your settings.
6.5 IP address (router IP address settings)
An IP address (Internet Protocol address) is a number
that facilitates the addressing of computers and other
devices in an IP network.
If you need to use a specifi c IP address from your
Internet provider, carry out the following settings:
Get IP Address:
Static means that you must use an IP address that has
been set by your Internet provider. Dynamic is set as default for most German DSL providers, and is therefore set as default here, too.
Static IP Address:
If required, enter the specifi ed IP address.
IP Subnet Mask:
If required, enter the specifi ed subnet IP address.
Gateway:
If required, enter the specifi ed standard gateway IP address.
NAT:
This fi eld should always be enabled.
Summary of Contents for 53120
Page 2: ...WLAN Modem Router 54 Mbps W I R E L E S S L A N 00053120...
Page 44: ...43...
