Hama 53120, Operating Instruction

Page: 32 / 44

31
g
Operating Instruction
Note:
The IP address has to be in the same address space as the one entered in the “Router Local IP” fi eld. Otherwise, you will no longer
be able to reach your router.
Example:
If your router IP address is 192.168.2.1, then the IP address for the DHCP Server should also begin with 192.168.2., and the last digits
can be between 2 and 254, although we do recommend that you keep the default setting.
IP Pool Count:
Here you enter the maximum number of IP addresses to be assigned.
Lease Time:
Indicates the validity period of a dynamically assigned IP address that a client received from the integrated DHCP server.
Click ->
SAVE at the bottom of the window to save your settings.
6 Interface Setup (Modem and Internet Access Settings)
On this screen, you can change the parameters for the integrated ADSL2+ modem and the access data for Internet access. To do
so, select Interface Setup from the Main Menu and then select the Internet sub-item. The most important settings in this area are
explained below:
6.1 ATM VC (DSL modem setting)
Asynchronous Transfer Mode (ATM)
is a method of trans-
ferring data whereby the data traffi c is transferred in small
packets, and the transfer is coded and asynchronous. You
must enter the following values, which differ according to
the DSL connection. (See screenshot below)
Virtual Circuit: PVC0 is selected by default.
Status: Activated must be selected.
VPI: 1
VCI: 32
Note : The values 1 and 32 are only valid for a Deutsche Telekom DSL connection. If your connection is through a different company or
you are not resident in Germany, ask your DSL connection provider for these values.
Click ->
SAVE at the bottom of the window to save your settings.
6.2 Encapsulation (DSL protocol)
The purpose of encapsulation is to encapsulate other protocols and to transport these in the form of IP tunnels.
In Germany, the PPPoE protocol is used almost exclusively;
this manual will therefore cover this protocol only. Users
with different protocols should consult their Internet service
provider, which will provide the relevant setting information.
Click ->
SAVE at the bottom of the window to save your
settings.
6.3 PPPoE/PPPoA (broadband connection protocol)
PPP over Ethernet (PPPoE) is the use of the Point-to-Point Protocol (PPP) with an Ethernet connection. PPPoE is currently used for
ADSL connections in Germany.
Servicename: You can enter a name of your
choosing here. This is optional.
Username: Enter the user name that you received from
your Internet provider in this fi eld.
Password: Enter the user password that you received
from your Internet provider in this fi eld.