23
g
Operating Instruction
Package contents:
1x Hama ADSL2+ Wireless LAN Modem Router, 54 Mbps
1x 12 V power supply unit
1x Printed operating instructions
1x RJ45 network cable
1x RJ11 DSL connecting cable
1x Voucher Kaspersky Internet Security (90 days version)
System requirements:
• Computer with built-in network card or WLAN adapter
• Operating system with TCP/IP protocol installed
• Java-capable Web browser such as Mozilla Firefox, Microsoft Internet Explorer or Opera.
Safety notes:
Do not use the device in moist or extremely dusty areas, on radiators or near heat sources. This device is not designed for use out-
doors. Protect the device from pressure and impact. The device may not be opened or moved during operation. Do not use the device
without an antenna attached.
Warning:
Use the router with the enclosed power supply unit only. Using other power supply units can cause irreparable damage to
the product.
Note: !!
The
“Connect On-Demand”
setting is recommended if you have a
pay-as-you-go payment plan (if you pay according to volu-
me or time)
. This means that the Internet connection is disconnected automatically after the period set in the
“Idle”
fi eld
(see section
6.4)
. Connection costs may be high if you are permanently connected to the Internet. Please also note that closing the browser does
not automatically disconnect you from the Internet. A number of programs send requests to the Internet or receive data without this
being clearly indicated. For the router, these requests are just as valid as opening a browser, for example. If you want to ensure that
there is no active connection to the Internet, you should switch off the device.
Requirements for installing the HAMA ADSL2+ WLAN Modem Router, 54 Mbps:
Ensure that you have the following before installing the Hama ADSL2+ WLAN Modem Router:
1. Enabled ADSL or ADSL2+ connection
2. Installed DSL splitter provided by your DSL connection service provider
3. User information from your Internet provider
4. Computer with installed (and error-free) network card
1 Connecting the ADSL2+ WLAN Modem Router
Connect the computers and other network devices such as hubs/switches to ports 1-4. Use a crossover or CAT5 patch cable (max.
100 m). The integrated switch automatically detects the connection speed of 10 or 100 Mbps, half/full duplex transfer mode and the
type of cable used.
Connect the DSL splitter to the “ADSL” connection on the rear of the ADSL2+ WLAN modem router using the DSL connecting cable.
Plug the provided power supply unit into an empty socket and connect it to the router.
Caution:
Unsuitable power supply units can cause damage.
Checking the installation:
There are different LEDs for indicating the status on the top of the device:
LED
State
Status
POWER
Illuminated
Power supply unit is connected and supplying power
Off
No power unit connected, device not being supplied with power
WLAN-G
Flashing
Wireless LAN is activated/data is being sent
Off
Wireless LAN is deactivated
SYNC
Illuminated
Modem has successfully synchronised with the switching centre
Flashing
Modem is attempting to synchronise with the switching centre
LAN 1-4
Illuminated
The corresponding LAN port has established a correct network connection
Flashing
Data transfer via respective LAN port
Off
No connection
Summary of Contents for 53120
Page 2: ...WLAN Modem Router 54 Mbps W I R E L E S S L A N 00053120...
Page 44: ...43...
