HF2013DX-A
HF POWER AMPLIFER
CAUTION
Before you turn the amplifier on, at least 2 hours should have expired since
it was brought in and unpacked in the room where it will be used. Pay
particular attention when you move it from a very cold into a very warm place
- condensation is likely and this could result in damage to the high voltage
circuits. In such a case, wait at least 4 hours. A similar effect can occur after
a rapid warming of the operating room (for instance after switching on a
powerful heater).
CAUTION
To avoid
Summary of Contents for HF2013DX-A
